This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.
This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale. About the F-35A Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called "fifth generation" fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35's maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come. • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm. • Features refined molded depictions of radar absorbent material (RAM) sections on the surface. • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. • Ordnance components can be attached to the weapons stations on the belly of the aircraft. • (Weapons bay door can only be attached closed.) • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB). • This kit also features realistic renderings of the following sections: - Y- shaped air intakes - Cockpit and landing gear bays - Engine nozzle (one-piece design) - Martin-Baker US16E ejection seat - RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises. - Boxes stored in nose landing gear bay. • Choose from open or closed canopy (not interchangeable after assembly). • Flaps are assembled in the up position. • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic. • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4). • Comes with three marking options: • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.

Tamiya Lockheed Martin F-35A Lightning II 1/72 Scale 60792

$69.99

GST and HST Tax Break

1 in stock

Buy this product and earn 139.98 points.

SKU: 4950344607921 Category: Tag:

Description

This model kit recreates the state-of-the-art F-35A Lightning II in 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II is available to fans in either preferred scale.

About the F-35A
Fighter jets have continued to develop since they were first seen in late WWII, to the point where modern-day aircraft such as the F-35 Lightning II and F-22 Raptor are often called “fifth generation” fighters; qualities such as their highly advanced stealth characteristics and network connectivity set them apart from earlier fighters. Developed under the Joint Strike Fighter Program (JSF), the F-35 integrates multiple functions into its design and there are three types at the time of writing: the F-35A conventional take-off and landing (CTOL) aircraft, the F-35B short take-off, vertical landing (STOVL), and the F-35C, with its larger wing and tail; across these three variants, the F-35 can accomplish various missions without impacting upon its observability and exemplary maneuverability. Multiple sensors are at the heart of its advanced capabilities, and the wealth of data harvested is shared via multifunction advanced data link, helping provide the crew with outstanding information via a large cockpit display and the helmet-mounted display system. The F-35’s maiden flight was in December 2006, and deployment with air arms in the U.S., Italy, Japan, and more is planned, as the aircraft appears set to take on a key role in the defense landscape in years to come.

  • 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm.
  • Features refined molded depictions of radar absorbent material (RAM) sections on the surface.
  • This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode.
  • Ordnance components can be attached to the weapons stations on the belly of the aircraft.
  • (Weapons bay door can only be attached closed.)
  • The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB).
  • This kit also features realistic renderings of the following sections:
    – Y- shaped air intakes
    – Cockpit and landing gear bays
    – Engine nozzle (one-piece design)
    – Martin-Baker US16E ejection seat
    – RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises.
    – Boxes stored in nose landing gear bay.
  • Choose from open or closed canopy (not interchangeable after assembly).
  • Flaps are assembled in the up position.
  • Canopy and EOTS sensor fairing on nose undersurface are recreated in transparent plastic.
  • Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4).
  • Comes with three marking options:
  • 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah
  • 301st Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base
  • Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-color painting guide.

Assembly and painting required. Kit does not include model cement glue, paint, and tools. Adult supervision where required.

Contents subject to change.

Related products

fr_CAFrench
fr_CAFrench