Following the release of a U.S. Navy version of the Brewster Buffalo in 1993, Tamiya now releases the B-339 export version of the Buffalo used by the Royal Air Force and Netherlands East Indies Army Air Corps during WWII. Kit comes with new parts such as canopy, propeller, seat and decals to accurately reproduce the Buffalo used throughout South East Asia. Also includes parts to reproduce the U.S. Navy version featuring gray fuselage. The Buffalo was first developed in 1935 as a U.S. Navy carrier based fighter. Featuring a modern mid-wing monoplane design with enclosed cockpit and retractable landing gear the first mass produced Buffalo was designated F2A-1, which was shortly followed by the improved F2A-2. Based on the U.S. Navy Buffalo, the B-339 Buffalo was for export only and was fitted with an export approved 1,100hp Wright Cyclone engine and redesigned for land use with navy equipment such as life raft and arrestor hook removed. The Royal Air Force (RAF) and the Netherlands East Indies Army Air Corps (ML-KNIL) used the B-339 to protect colonial outposts in Malaysia, Singapore and Java during WWII. Highly detailed 1/48 scale assembly kit of the Brewster B-339 Buffalo Overall length: 163mm, wing span: 223mm Authentically reproduced large fuselage and unique landing gear. Kit includes parts to accurately reproduce RAF, ML-KNIL or U.S. Navy aircraft. New parts such as canopy, rear fuselage and propeller authentically reproduced in high-quality detail. Includes a full range of accessories including two 100 pound bombs, one pilot figure sitting down and one figure standing, and markings to reproduce a choice of four different aircraft.
Following the release of a U.S. Navy version of the Brewster Buffalo in 1993, Tamiya now releases the B-339 export version of the Buffalo used by the Royal Air Force and Netherlands East Indies Army Air Corps during WWII. Kit comes with new parts such as canopy, propeller, seat and decals to accurately reproduce the Buffalo used throughout South East Asia. Also includes parts to reproduce the U.S. Navy version featuring gray fuselage. The Buffalo was first developed in 1935 as a U.S. Navy carrier based fighter. Featuring a modern mid-wing monoplane design with enclosed cockpit and retractable landing gear the first mass produced Buffalo was designated F2A-1, which was shortly followed by the improved F2A-2. Based on the U.S. Navy Buffalo, the B-339 Buffalo was for export only and was fitted with an export approved 1,100hp Wright Cyclone engine and redesigned for land use with navy equipment such as life raft and arrestor hook removed. The Royal Air Force (RAF) and the Netherlands East Indies Army Air Corps (ML-KNIL) used the B-339 to protect colonial outposts in Malaysia, Singapore and Java during WWII. Highly detailed 1/48 scale assembly kit of the Brewster B-339 Buffalo Overall length: 163mm, wing span: 223mm Authentically reproduced large fuselage and unique landing gear. Kit includes parts to accurately reproduce RAF, ML-KNIL or U.S. Navy aircraft. New parts such as canopy, rear fuselage and propeller authentically reproduced in high-quality detail. Includes a full range of accessories including two 100 pound bombs, one pilot figure sitting down and one figure standing, and markings to reproduce a choice of four different aircraft.
Following the release of a U.S. Navy version of the Brewster Buffalo in 1993, Tamiya now releases the B-339 export version of the Buffalo used by the Royal Air Force and Netherlands East Indies Army Air Corps during WWII. Kit comes with new parts such as canopy, propeller, seat and decals to accurately reproduce the Buffalo used throughout South East Asia. Also includes parts to reproduce the U.S. Navy version featuring gray fuselage. The Buffalo was first developed in 1935 as a U.S. Navy carrier based fighter. Featuring a modern mid-wing monoplane design with enclosed cockpit and retractable landing gear the first mass produced Buffalo was designated F2A-1, which was shortly followed by the improved F2A-2. Based on the U.S. Navy Buffalo, the B-339 Buffalo was for export only and was fitted with an export approved 1,100hp Wright Cyclone engine and redesigned for land use with navy equipment such as life raft and arrestor hook removed. The Royal Air Force (RAF) and the Netherlands East Indies Army Air Corps (ML-KNIL) used the B-339 to protect colonial outposts in Malaysia, Singapore and Java during WWII. Highly detailed 1/48 scale assembly kit of the Brewster B-339 Buffalo Overall length: 163mm, wing span: 223mm Authentically reproduced large fuselage and unique landing gear. Kit includes parts to accurately reproduce RAF, ML-KNIL or U.S. Navy aircraft. New parts such as canopy, rear fuselage and propeller authentically reproduced in high-quality detail. Includes a full range of accessories including two 100 pound bombs, one pilot figure sitting down and one figure standing, and markings to reproduce a choice of four different aircraft.
Following the release of a U.S. Navy version of the Brewster Buffalo in 1993, Tamiya now releases the B-339 export version of the Buffalo used by the Royal Air Force and Netherlands East Indies Army Air Corps during WWII. Kit comes with new parts such as canopy, propeller, seat and decals to accurately reproduce the Buffalo used throughout South East Asia. Also includes parts to reproduce the U.S. Navy version featuring gray fuselage. The Buffalo was first developed in 1935 as a U.S. Navy carrier based fighter. Featuring a modern mid-wing monoplane design with enclosed cockpit and retractable landing gear the first mass produced Buffalo was designated F2A-1, which was shortly followed by the improved F2A-2. Based on the U.S. Navy Buffalo, the B-339 Buffalo was for export only and was fitted with an export approved 1,100hp Wright Cyclone engine and redesigned for land use with navy equipment such as life raft and arrestor hook removed. The Royal Air Force (RAF) and the Netherlands East Indies Army Air Corps (ML-KNIL) used the B-339 to protect colonial outposts in Malaysia, Singapore and Java during WWII. Highly detailed 1/48 scale assembly kit of the Brewster B-339 Buffalo Overall length: 163mm, wing span: 223mm Authentically reproduced large fuselage and unique landing gear. Kit includes parts to accurately reproduce RAF, ML-KNIL or U.S. Navy aircraft. New parts such as canopy, rear fuselage and propeller authentically reproduced in high-quality detail. Includes a full range of accessories including two 100 pound bombs, one pilot figure sitting down and one figure standing, and markings to reproduce a choice of four different aircraft.
Following the release of a U.S. Navy version of the Brewster Buffalo in 1993, Tamiya now releases the B-339 export version of the Buffalo used by the Royal Air Force and Netherlands East Indies Army Air Corps during WWII. Kit comes with new parts such as canopy, propeller, seat and decals to accurately reproduce the Buffalo used throughout South East Asia. Also includes parts to reproduce the U.S. Navy version featuring gray fuselage. The Buffalo was first developed in 1935 as a U.S. Navy carrier based fighter. Featuring a modern mid-wing monoplane design with enclosed cockpit and retractable landing gear the first mass produced Buffalo was designated F2A-1, which was shortly followed by the improved F2A-2. Based on the U.S. Navy Buffalo, the B-339 Buffalo was for export only and was fitted with an export approved 1,100hp Wright Cyclone engine and redesigned for land use with navy equipment such as life raft and arrestor hook removed. The Royal Air Force (RAF) and the Netherlands East Indies Army Air Corps (ML-KNIL) used the B-339 to protect colonial outposts in Malaysia, Singapore and Java during WWII. Highly detailed 1/48 scale assembly kit of the Brewster B-339 Buffalo Overall length: 163mm, wing span: 223mm Authentically reproduced large fuselage and unique landing gear. Kit includes parts to accurately reproduce RAF, ML-KNIL or U.S. Navy aircraft. New parts such as canopy, rear fuselage and propeller authentically reproduced in high-quality detail. Includes a full range of accessories including two 100 pound bombs, one pilot figure sitting down and one figure standing, and markings to reproduce a choice of four different aircraft.

Tamiya Brewster B-339 Buffalo Pacific Theater 1/48 Scale 61094

$31.99

Out of stock

Email when stock available

SKU: 4950344996858 Category: Tag:

Description

Following the release of a U.S. Navy version of the Brewster Buffalo in 1993, Tamiya now releases the B-339 export version of the Buffalo used by the Royal Air Force and Netherlands East Indies Army Air Corps during WWII. Kit comes with new parts such as canopy, propeller, seat and decals to accurately reproduce the Buffalo used throughout South East Asia. Also includes parts to reproduce the U.S. Navy version featuring gray fuselage.

The Buffalo was first developed in 1935 as a U.S. Navy carrier based fighter. Featuring a modern mid-wing monoplane design with enclosed cockpit and retractable landing gear the first mass produced Buffalo was designated F2A-1, which was shortly followed by the improved F2A-2. Based on the U.S. Navy Buffalo, the B-339 Buffalo was for export only and was fitted with an export approved 1,100hp Wright Cyclone engine and redesigned for land use with navy equipment such as life raft and arrestor hook removed. The Royal Air Force (RAF) and the Netherlands East Indies Army Air Corps (ML-KNIL) used the B-339 to protect colonial outposts in Malaysia, Singapore and Java during WWII.

Highly detailed 1/48 scale assembly kit of the Brewster B-339 Buffalo
Overall length: 163mm, wing span: 223mm
Authentically reproduced large fuselage and unique landing gear.
Kit includes parts to accurately reproduce RAF, ML-KNIL or U.S. Navy aircraft.
New parts such as canopy, rear fuselage and propeller authentically reproduced in high-quality detail.
Includes a full range of accessories including two 100 pound bombs, one pilot figure sitting down and one figure standing, and markings to reproduce a choice of four different aircraft.

Assembly and painting required. Kit does not include model cement glue, paint, and tools. Adult supervision where required.

Contents subject to change.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
Wade Robinson
Odd Aircraft, Great Kit

The kit arrived promptly and was well packaged. The level of detail in this kit is really high, giving the average modeler an opportunity to produce a solid aircraft to display. The Buffalo wasn't a very successful aircraft, but Tamiya has made it a nearly perfect model to build.

R
Rob Yule
610## Series Are Always Excellent

I have not built this kit yet but everything is as one expects of any of the great Tamiya 610## series of 1:48 aircraft kits. These are good for a quick build or a new modeller to start with.

P
Pierre Lagace
Added to my collection of unbuilt model kits modrp

I will probably build it later in 2023.

Related products

fr_CAFrench
fr_CAFrench