Micro Liquid Decal Film by Microscale Industries MI-12 MI12 MI # 12
$6.99
1 in stock
Buy this product and earn 13.98 points.
Description
Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes.
Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, don’t take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. It’s that simple.
But that is just the beginning, if you want to make a decal of your own design, all you need is some decal paper. The unused margins of some decals you have will do. You can use ink, paint, dry transfers to make a design. Then coat with Micro Liquid Decal Film, and you may be surprised at how well you can do. It is a lot easier to do ‘art work’ on a flat surface than directly on a model.
Instruction Sheet – microscale.pdf – 2.3MB PDF
Size: 1 oz
Item: MIC-MI-12
Contents subject to change.
Customer Reviews
Really grate shop , Any order on line comes fairly quick. My only issue is that a lot of stuff is out of stock.
Hi Robert,
Thank you for your order.
A lot of issues with distributors right now! Some lines also come over seas, so a bit of a longer wait.
well, the decal sheets themselves were absolute garbage, so this is absolute crap. just flat out doesn't do what it's supposed to do. follow the instructions? nope, won't work. just an overall disappointment. and sunward...wow, don't even get me started there
Hi Randall,
We've responded to your order feedback, but just in case, here is the same response:
Micro Liquid Decal Film by Microscale Industries MI-12 MI12 MI # 12 is not airbrush ready, it requires thinning aka a fine spray.
The bottle instructions, our website description and Microscale all recommend using a paint brush:
https://www.sunwardhobbies.ca/mainimages/microscale.pdf
We do not provide support unless there is a manufacturing issue.
I tried installing 35 year old decals on my airplane model. The 1st one shattered like broken glass. Then I got Decal Film and the problem was solved for the remaining decals. Obviously I recommend. Simple to use.
Very good product, specially when you have some old kits. The product will help you saved a LOT of old decals from ruin. I recommend this product
I have a lot of old kits - this stuff saved a LOT of old decals from ruin.
French