Revell Acrylic 100ml Spray Black Matt RVP 34108

Revell Acrylic 100ml Spray Black Matt RVP 34108

$13.99

6 en inventaire

Buy this product and earn 27.98 points.

UGS : 4009803341088 Catégorie:

La description

Revell Spray Color are acrylic spray paints that dry very quickly and have high opacity and high scratch resistance. Due to its special composition, the polycarbonate bodies of RC cars can also be painted with Spray Color.

For plastic, polycarbonate, wood, metal and ceramics

Shake for 1 minute before use, spray at a distance of 20-30cm, repeat process 2-3 times, then clean nozzle – done!

Spray contains extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness and dizziness. Harmful to aquatic organisms, with long-term effect. If medical advice is needed, have container or label ready. Keep out of the reach of children. Keep away from heat / sparks / open flames / hot surfaces. Do not smoke.

Keep out of the reach of children.

Contenu sujet à changement.

Cela doit être expédié par voie terrestre en raison de la réglementation sur le transport des marchandises dangereuses. En conséquence, les peintures en aérosol ne sont ni retournables ni remboursables.
Canada – ne peut pas être expédié à certains endroits
États-Unis – ne peut pas être expédié par voie aérienne – service Parcel Select uniquement.

Nous sommes un expéditeur certifié de Produits dangereux

Avis des clients

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Don Horsnell
34108 Revell black matt spray paint.

Excellent coverage and great looking finish. Prompt delivery as usual.

S
Stephan Groos
Need More of This

While I would almost always recommend airbrushing over spraying, I found this product to be a pretty good alternative to cover large surfaces. The focus of the spray was concentrated enough that I could hold larger parts in my hand as I sprayed without getting too much overspray on my thumb. The smell was quite mild, and the tack-free time was definitely longer than airbrushing but short enough where I applied thin coats. As expected, I had to shake the can quite a bit to get the perfect spray. I found that the amount of spray was acceptable for the main parts of an average model kit but not quite enough for all sides of all part trees. Even so, the cured finish was perfect and remarkably resistant to scratching, which was pretty good for a matt paint.

Produits similaires

en_CAEnglish
en_CAEnglish