Flash Master Blades Pack of 10 CLEARANCE

La description

Trimming flash is not our favorite part of the hobby.

Enter the Flash Master Blade. The result of research and development is a slimmer, flexible blade that gives you much more control of how much flash you remove. Think of the figures that you have encountered with the toughest material to trim. The Flash Master will glide through that flash. It won’t make the job easy, but it will make it EASIER – and the results will be so much better.

The Flash Master will hold its edge at least THREE TIMES as long as a traditional blade. Sometimes the rigid traditional blade is better at tasks where I need to scrape a little – or chop a big chunk away. But for some of the most important and delicate spots, the Flash Master is the only way to go.

The Flash Master works with most popular blade handles. However, the blades are small and super-slim, so the important question is: Does your blade handle close completely? If yes, you are all set.

We’ve tried it on a number of blade holders from many manufacturers. If you’re in doubt, we know for certain that they will work with the X-Acto #1, the X-Acto #2, the Xacto Curve, and the X-Acto Griptster. If your blade holder won’t tighten to a complete close, chances are that there is some oxidization on the threads. (You may not have asked it to go that far in years.) Usually backing it off completely and knocking some old gunk off the threads does the trick. Reassemble and tighten without any blade in place to see if it closes until there is no gap in the blade slot. Then, back off just a little and slide the Flash Master in place and re-tighten.

Item: Flashmaster-10

Contenu sujet à changement.