Boîtier matériel CTI Pro38

$63.33$132.15

CTI Hardware orders may be factory ordered and will delay shipping. If time sensitive, please contact us before placing an order.

Buy this product and earn 126.66 points.

UGS : Cas Pro38 Catégorie:

La description

Pro38® rocket motor hardware is as simple as you can get. With the forward and rear closures included in the reload kit, you only need one piece of hardware – the motor casing. With no expensive aluminum closures to buy, your up-front investment in hardware is significantly reduced!

Manufactured from thin-wall 6061-T6 aluminum tubing with an anodized coating for corrosion protection, Pro38® motor cases are lightweight but strong, capable of holding well over 3000 psi of internal pressure. The forward closure is retained by a formed rim at the head end of the casing. The rear of the casing has precision-machined internal threads.

Pro38® motor casings are available in seven sizes to fit reloads from G through J class. Please refer to the motor specifications page to see which casing is required for each Pro38® reload.

Don’t forget that you’ll need a delay adjustment tool for your Pro38 reloads, unless you use electronic ejection exclusively. The ProDAT-38 tool allows you to choose from 5 preset delay times with every reload.

Disponible en:

  • 1 étui à grains
  • Caisse de 2 céréales
  • Caisse de 3 céréales
  • Caisse de 4 céréales
  • Caisse de 5 céréales
  • Caisse de 6 grains
  • Étui à grains 6GXL

Des instructions: Instructions matérielles Pro38
Dimensions: Dimensions du matériel Pro38
Dimensions de l'entretoise : Pro38 Case Dimensions

Item: P38 Cases

Contenu sujet à changement.

Avis des clients

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
B. Simkin
CTI pro 38

By far the easiest introduction to reloadable motors, the CTI 38mm line needs only: adjust eject delay grain; replace delay/ejection assembly in reload; screw reload into casing; load assembly into rocket. No messing with O-rings, (almost) no fiddley assembly steps, and the 38mm range covers low power (to get used to the process) through L2 high power reloads. The grain categorization makes clear what casing fits what reload.

en_CAEnglish