Bob Smith Industries Insta Cure Plus Gap Filling CA Colle 56 ml BSI 108 BSI 108

Description

Pour une sélection complète de produits Bob Smith Industries, veuillez consulter notre page de sélection :
www.sunwardhobbies.ca/bob-smith-glue-and-adhesive-selection-chart

Super Glue – Colle cyanoacrylate CA – Trucs et conseils
www.sunwardhobbies.ca/super-glue-cyanoacrylate-ca-glue-tips-advice/

LARGER size.

INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds.

For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used.

To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications.

High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with its freshness, gives a guaranteed 2 year shelf life.

CAs are reactive monomers that chemically link (polymerize) when pressed into a thin film. The very thin layer of water moisture present on most surfaces acts as an alkali, or weak base, which is the catalyst that results in bonding; however, the presence of detectable amounts of water usually degrades the performance of CAs.

56ml / 2 oz

Item: BSI-108

Contenu sujet à changement. Le prix comprend le coupon en magasin.