Ammo by Mig Jimenez Matt Lucky Varnish AMIG2055 17ml

$5.49

1 en inventaire

Buy this product and earn 10.98 points.

UGS : 8432074020554 Catégorie:

La description

Varnish application has long been one of the biggest challenges for modelers. Many have ruined a few models due to the use of poor quality or inappropriate varnishes for the job at hand, and the thing is that the varnishing process is an extremely important step of the build. For the first time, AMMO releases a complete varnish range for winning results on each and every model.

These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple manner. It must be used in thin layers, and can be applied directly from the jar without thinning for a perfect finish. When used through the airbrush, we recommend spraying 6 inches (15 cm) away from the surface. It is non-toxic and odorless, and dries completely in 24 hours.

This new varnish range was carefully developed over a lengthy period to ensure the modeler a perfect result every time. Don´t take your chances, use LUCKY VARNISH, a winning product that will rule out any mishap that may occur when using ordinary varnishes. Available in all the usual finishes used in scale modeling, from high gloss to dead flat.

Contenu sujet à changement.

Avis des clients

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
UN
Alfredo Ferrer
Matt Varnish

This is the first time I used AMIG2055 Matt varnish and I like the finish. There is one drawback however. After I applied the matt varnish and let dry for > 24hours, I then used AMMO Shader. To correct the Shader application, you can use water. If you do however you also remove the underlying matt varnish!

en_CAEnglish