Estes Rockets Xtreme Rocket Kit 7306

Description

Looking for XTREME altitude and XTREME excitement? Look no further than the extraordinary Estes XTREME! This rocket is XTREME in every way! XTREME performance! XTREME styling! XTREME coolness! And – best of all – XTREME  fun! There’s no mistaking the XTREME capabilities of this extra-streamlined flier. The Estes XTREME is an easy to build, Intermediate-Level model rocket kit that delivers in every way!  

From the tip of its stretched nose, to its rear engine-retainer hook, the 16-inch Estes XTREME is a striking model that even novice rocketeers can build quickly and easily. Designed around an Estes BT-20 body tube, with surface mounted, laser-cut card-stock fins, and an old-school engine-mount block, this traditionally configured three-fin model rocket achieves exceptional performance on a range of Estes engines, from 1/2 A to C. The narrow, swept fins are precision shaped for maximum stability and minimum air resistance. Cut from durable card stock, the low-profile fins require no shaping, and only minimal finishing before they’re ready to fly. Topping it off, the elongated plastic nose cone slices through the atmosphere with ease. There’s nothing holding this one back – the Estes XTREME is engineered to impress! 

Made for XTREME altitudes, the Estes XTREME can reach up to 1600 feet on a single C6-5 engine. If the launch site or weather conditions dictate a more modest outing, try launching with the A8-3, B6-4, or one of the other recommended engines. Even with a lower rated engine, the Estes XTREME still packs an impressive punch. Recovery drift is kept to a minimum with the fast-return, 24-inch reflective silver streamer, which also makes tracking this one back to the ground much easier!  

Ready for that little something extra? Expand your fleet now with the extraordinary Estes XTREME!

WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, yellow glue, hobby knife, masking tape, clear tape, paint (black). (Tools, construction and finishing supplies not included.)

WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

Additional Information:
Recommended Engines: 1/2A6-2, A8-3, A8-5, B4-4, B6-6, C6-5, C6-7
Projected Max Altitude: 1600 ft. (488 m)
Recovery System: 24 in. (61 cm) Silver Mylar Streamer
Length: 16.8 in. (42.7 cm)
Diameter: 0.74 in. (19 mm)
Estimated Weight: 0.8 oz. (22.7 g)
Estimated Assembly Time: 1 Hour (painting and glue drying time not included)
Fin Materials: Cardstock
Decal Type: Self-stick
Launch System: Porta-Pad II and Electron Beam Launch Controller
Launch Rod Size: 1/8″

Age Recommendation: Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages.

Assembly and painting maybe required. Kit does not include model cement glue, paint, wadding, batteries, igniters, and tools. Adult supervision where required.

Rocket engines not included. LAUNCH SYSTEM not included

In Canada: Do not launch model rocket motors in a manner that would endanger flying aircraft and or become a hazard to aircraft. Interdit a la vente pour les moins de 12 ans. UN0432. Ne pas lancer les modeles de fusee de soprtes qu’ils seraint un danger pour las securite aerienne.

Contents subject to change. Price includes in store coupon.