CTI Pro54 Hardware Casing
$87.03 – $233.79
CTI Hardware orders may be factory ordered and will delay shipping. If time sensitive, please contact us before placing an order.
Buy this product and earn 174.06 points.
Description
Pro54® rocket motor hardware is lightweight and robust, consisting of two components; the motor casing and the rear retaining ring.
Manufactured from thin-wall 6061-T6 aluminum tubing with an anodized coating for corrosion protection, Pro54 motor cases are lightweight but strong, capable of holding nearly 2500 psi of internal pressure. The forward closure is retained by a formed rim at the head end of the casing. The rear of the casing has precision-machined external threads, and uses a separate threaded ring to retain the reload. The retaining ring can be interchanged between Pro54 cases.
Pro54® motor casings are available in seven sizes to fit reloads from I through K class. Please refer to the motor specifications page to see which Pro54 casing is required for each reload.
Don’t forget that you’ll need a delay adjustment tool for your Pro54 reloads, unless you use electronic ejection exclusively. The ProDAT-54 tool allows you to reduce the delay time of your Pro54 reload by any amount up to 10 seconds.
Available in:
- 1 Grain Case
- 2 Grain Case
- 3 Grain Case
- 4 Grain Case
- 5 Grain Case
- 6 Grain Case
- 6GXL Grain Case
ProDAT-54 only work with Pro54 reloads. Pro54 motor cases are not compatible with any other brand of reload.
Instructions PDF: Pro54 Hardware Instructions
Hardware Dimensions PDF: Pro54 Hardware Dimensions
Spacer Instructions PDF: Pro54 Case Spacer Instructions
Item: P54 Hardware Case
Contents subject to change.
French