CTI Pro38 Hardware Casing
$63.33 – $132.15
CTI Hardware orders may be factory ordered and will delay shipping. If time sensitive, please contact us before placing an order.
Buy this product and earn 126.66 points.
Description
Pro38® rocket motor hardware is as simple as you can get. With the forward and rear closures included in the reload kit, you only need one piece of hardware – the motor casing. With no expensive aluminum closures to buy, your up-front investment in hardware is significantly reduced!
Manufactured from thin-wall 6061-T6 aluminum tubing with an anodized coating for corrosion protection, Pro38® motor cases are lightweight but strong, capable of holding well over 3000 psi of internal pressure. The forward closure is retained by a formed rim at the head end of the casing. The rear of the casing has precision-machined internal threads.
Pro38® motor casings are available in seven sizes to fit reloads from G through J class. Please refer to the motor specifications page to see which casing is required for each Pro38® reload.
Don’t forget that you’ll need a delay adjustment tool for your Pro38 reloads, unless you use electronic ejection exclusively. The ProDAT-38 tool allows you to choose from 5 preset delay times with every reload.
Available in:
- 1 Grain Case
- 2 Grain Case
- 3 Grain Case
- 4 Grain Case
- 5 Grain Case
- 6 Grain Case
- 6GXL Grain Case
Instructions: Pro38 Hardware Instructions
Dimensions: Pro38 Hardware Dimensions
Spacer Dimensions: Pro38 Case Dimensions
Item: P38 Cases
Contents subject to change.
French