Bob Smith Industries Insta Cure Plus Gap Filling CA Glue 56ml BSI 108 BSI 108
$18.99
31 in stock
Buy this product and earn 37.98 points.
Description
For a complete selection of Bob Smith Industries Products, please see out selection page:
www.sunwardhobbies.ca/bob-smith-glue-and-adhesive-selection-chart
Super Glue – Cyanoacrylate CA Glue – Tips and Advice
www.sunwardhobbies.ca/super-glue-cyanoacrylate-ca-glue-tips-advice/
LARGER size.
INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds.
For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used.
To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications.
High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with its freshness, gives a guaranteed 2 year shelf life.
CAs are reactive monomers that chemically link (polymerize) when pressed into a thin film. The very thin layer of water moisture present on most surfaces acts as an alkali, or weak base, which is the catalyst that results in bonding; however, the presence of detectable amounts of water usually degrades the performance of CAs.
56ml / 2 oz
Item: BSI-108
Contents subject to change.
The bob/smith Ca glue is great stuff I had a hard job together the cap OFF it BROKE IN TWO PICES I WASTED CA GLUE ON MY HAND luck I hap water and ASTONE IN MY WORK SHOP bottle cap must have gotten brittle over time I like shopping wit sunward hobbies
This glue works on pretty much everything.
Bob Smith Industries Insta Cure Plus Gap Filling is an excellent product like all the Bob Smith Industries glues...
Bob Smith Industries Insta Cure Plus Gap Filling CA Glue 56ml BSI 108 BSI 108
This is without a doubt the absofrigginglutely best CA Glue Ihave ever found. I would recommend it for whatever your modeling needs including 3-D resin printers. Had popular brand I got 2 years ago with a 1/12th scale motorcycle project & no matter what I tried it wouldn't work on a resin printed engine. Had a bottle of BSI Glue, so I gave it a try & virtually instantaneous adhesion!
Related products
-
Bob Smith Industries Insta-Set Refill Accelerator for CA Cyanoacrylate Glue 8 oz BSI152 BSI 152
28 reviews -
Bob Smith Industries Insta Cure Plus Gap Filling CA Glue 227ml BSI109 BSI 109
4 reviews -
Bob Smith Industries Clear InstaFlex Plus Rubber Toughened 28ml BSI120 BSI 120
2 reviews -
Bob Smith Industries Uncure CA Debonder 28ml BSI161 BSI 161
16 reviews