Alclad II ALC 4107 Chrome for Plastic 4 ounce Size
$46.99
Out of stock
Email when stock available
Description
Larger 4 Ounces Size of Alclad II 107 Chrome for Plastic
Large 4 ounce / 118ml
For a complete selection of Alcad II Lacquers, please see our selection chart
www.sunwardhobbies.ca/alclad-lacquer-chart
Application Guide for Plastic Models:
Alclad 4107 is for use on injection plastic model kits.
A primer is necessary – High-Shine ALCLAD finishes require a glossy base coat.
One of these primers MUST be applied before using High Shine ALCLAD:
ALCLAD Gloss Black Base ALC-304/305
ALCLAD Clear Base ALC-303
Preparation and Spraying:
The surfaces to be painted must be thoroughly clean and free from dust, grease, oil, and finger marks.
Apply the correct primer for the type of Alclad being used.
ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.
Buffing is not necessary-tonal variation can be made by polishing selected panels with Micromesh.
Contents subject to change.
French