Alclad II ALC 118 Gold Titanium
$12.29
3 in stock
Buy this product and earn 24.58 points.
Description
For a complete selection of Alcad II Lacquers, please see our selection chart
www.sunwardhobbies.ca/alclad-lacquer-chart
APPLICATION GUIDE-PLASTIC MODELS:
For use on injection plastic kits a primer is necessary.
High-Shine ALCLAD finishes require a glossy base coat.
Apply one of these primers before using High Shine ALCLAD:
ALCLAD GLOSS BLACK BASE ALC-304/305
ALCLAD CLEAR BASE ALC-303
PREPARATION AND SPRAYING
The surfaces to be painted must be thoroughly clean and free from dust,grease,oil and finger marks.
Apply the correct primer for the type of Alclad being used.
ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.
Buffing is not necessary-tonal variation can be made by polishing selected panels with Micromesh.
Item#:ALC-118 Gold Titanium
Contents subject to change.
French